The edging and multi-zone scheduling are fantastic. The anti-theft alarm is loud — turned it down and we're good. Still an easy 4.

My old robot left a shaggy strip along every border. The offset blade on the X3 Plus cuts right up to the edge. Looks professional.

Left a garden hose, a watering can, and my kid's scooter out on the lawn as a test. It calmly went around all three. The AI is legit, and the clean fence-line cut is the cherry on top.

The Ride-on-Edge blade cuts right up against my fence and the paver walkway. I used to spend 20 minutes with a string trimmer after every mow — now there's nothing left to trim.

Front yard, back yard, and a fenced dog run — all separate zones, each on its own schedule. Set it and forget it.

That offset blade is the real deal. Along the fence line it's a crisp cut. I haven't touched a trimmer in a month.

My third of an acre is really three separate patches — front, side, and a fenced back — and I needed something that could treat them as distinct areas. The X3 Plus multi-zone setup let me schedule each one and the AONavi navigation moves between them accurately. Add the Ride-on-Edge cutting along the fence and I've genuinely retired my trimmer. AI obstacle avoidance dodges the kids' soccer balls too instead of grinding over them.

Can't say enough about the Ride-on-Edge blade — my fence line and paver edges look professionally trimmed and I've retired my string trimmer. The one thing I'll flag for buyers: getting the RTK/AONavi positioning dialed in took me a couple tries to find a good spot with clear sky, so give yourself a little setup time. Once it's locked in, the accuracy and multi-zone control are excellent.

The offset blade cutting right along my hardscape with no hand-trimming is exactly why I bought this, and it lives up to it. Multi-zone and the anti-theft GPS are great too. Small nitpick: when I edit a zone's schedule in the app it occasionally doesn't save on the first tap and I have to confirm twice. Minor, but I noticed it.

Here's what nobody tells you about robot mowers: most of them leave a shaggy 3-inch border along every fence, bed, and driveway because the blade sits inside the wheels, so you STILL have to go out with a trimmer and do the annoying part yourself. The X3 Plus's Ride-on-Edge offset blade actually reaches the boundary. Along my hardscape and the back fence it leaves a line so clean I stopped owning a string trimmer. Add in the multi-zone setup — I've got a front, a back, and a weird side strip all programmed separately — and the AONavi RTK navigation keeps it dead accurate row to row. The AI dodged my dog twice that I saw. And the GPS anti-theft with geofencing gives me real peace of mind leaving it out. This is the first one that eliminated hand-trimming for me, full stop.

The RTK navigation lays down straight, even rows and the edge cut is clean. Exactly what I hoped for on a 0.3 acre lot.

Everybody talks about navigation but for me the killer feature is that offset Ride-on-Edge blade. My yard has a long fence line and a stone retaining wall, and both used to mean 20 minutes of trimming after every single mow. Now the X3 Plus rides the edge and cuts it clean, so I literally do nothing. Multi-zone works, obstacle avoidance is smart, and the GPS anti-theft is a nice bonus, but the no-trimming thing alone justified the purchase for me.

Once it's running the Ride-on-Edge cutting is fantastic and my borders look professionally edged. Knocking one star because the initial RTK positioning setup was more finicky than I expected — I had to reposition for a clearer sky view before it locked in reliably. After that, rock solid. Just budget extra time for the first-day setup.

The Ride-on-Edge blade cuts right up against my fence and the paver walkway. No more crawling around with the string trimmer after every mow.

We leave the mower out in a fairly open yard and I was nervous about it walking off. The geofencing and GPS anti-theft settled that — if it leaves the zone I get an alert. Haven't needed it, but I sleep better.

Let me lead with the good: the edge cutting and multi-zone are excellent and it's clearly a capable machine. My three-star reason is practical — I have a row of tall oaks near the house and the RTK signal drops in that corner, so it occasionally pauses or drifts until it re-acquires. I ended up repositioning the base station to a more open spot which helped a lot, but figuring that out took some trial and error. I'd also caution folks with steep wet slopes to watch traction on damp days. Fixable stuff, just wanted to be honest about the learning process.

Cuts beautifully and the anti-theft gives me peace of mind. The only reason it's not five is the multi-zone app took me a bit to wrap my head around at first — once it clicked it was easy, but the initial setup of separate zones wasn't as intuitive as I expected.

Didn't believe a robot could edge along a fence without a human finishing it. The Ride-on-Edge proved me wrong on day one. Consider me converted.

The edge cutting along my straight fence runs is fantastic and does exactly what's advertised. My only small nitpick is one tight inside corner where two beds meet — the edge blade leaves a little tuft I clip by hand every few weeks. Everywhere else it's spotless, so it's a minor thing.

The edge cutting and multi-zone features are excellent and it navigates my 0.3 acre precisely. Four stars because the app only lets me set one start time per zone per day — I'd like to split a zone into a morning and evening pass during peak growth. Minor, but I hit the limit. Everything else is great.

Best part is the offset blade. My hardscape borders look edged now without me doing anything.

I did a lot of research before buying and the RTK plus V-SLAM navigation is the real deal — it lays down straight, consistent lines and remembers my zones perfectly. What surprised me most was the edge blade genuinely eliminating my trimming along the driveway and fence. For a medium yard with a lot of borders, this hits a sweet spot I couldn't find elsewhere. Setup was straightforward and it's been rock solid since day one.

The AONavi combo of RTK and V-SLAM keeps it accurate even along my curved beds. Watched it detect and steer around a garden hose I'd left out instead of dragging it. Multi-zone is easy to set up in the app. Very pleased.

Part of my yard runs downhill and I worried about traction. It's rated to 30% and my slope hasn't fazed it once.

Live on a corner lot with foot traffic and the GPS anti-theft plus geofencing means I don't sweat leaving it out. Get an alert the second it crosses the boundary.

Genuinely annoyed at myself. The offset blade does the fence and the retaining wall edge cleaner than I did with a trimmer. Mid-size yard, handled with no fuss.

Was paying a crew every two weeks and the edges were still hit or miss. The X3 Plus with the offset edge blade does a cleaner job along my retaining wall and fence than they did, and it runs whenever I want. The RTK plus V-SLAM combo keeps it precise even after I rearranged some beds. Math worked out to paying for itself before next spring.

Medium yard with a lot of hardscape borders. It hugs every edge. I've put the trimmer away.