Our whole backyard is chain-link and every mower I've owned left a green stripe along it. The X3 Plus rides the boundary with the offset blade and the fence line is clean. Three months, no trimmer.

Edge cutting is as good as advertised and it finishes every run. But the app loses the mower at the far end of the yard and the history shows gaps. A range extender fixed it. The mower didn't need it, the app did.

he carried it to the curb as a prank. my phone buzzed before he reached the mailbox. mows the 0.3 acre clean too, but the alert sold me.

Bought it for the Ride-on-Edge and it delivered — clean hardscape edges, beds avoided, and I do nothing. Excellent mower.

Vision AI spots the ball and the chew toy and steers around in real time. No more clearing the yard before every mow.

Bought it for the Ride-on-Edge and the fence line is spotless. Mapping the front/back/side zones and no-go areas took a couple passes to nail, but it's been perfect since.

Ride-on-Edge cuts right to the fence and paver borders. That weekly 20-minute edging chore is just gone. Best feature on any robot I've seen.

Between the edge cutting and per-zone scheduling, it retired my mowing and my string-trimming. AONavi keeps it precise around the beds. Weekends back.

Handles our medium lot and the obstacle avoidance is quick. The multi-zone tools work well but take a little learning. Worth it.

Front, back and side yard each mapped separately with no-go areas around the garden. AONavi keeps it precise across the 0.3 acre.

Took three spots before the base had clear sky. After that, the rows are ruler straight and the cut height is dead even. Four stars for the setup detour.

We back onto a public path so theft was a concern. The GPS lock and geofence alert put that to rest — and the clean hardscape edges are the weekly payoff.

The offset blade reaches edges other robots leave shaggy. Our fence and driveway borders are crisp with no hand-trimming. Sold on that alone.

Two zones with a gate between them. It opens nothing, I leave the gate propped, and it moves itself over. 0.28 acre total, both zones done before I'm home.

Every robot I looked at leaves an uncut band along fences and walls. The X3 Plus's offset blade reaches it. On a 0.3-acre lot full of borders, that sealed the deal.

Front, side, back, and the strip by the pool each on their own schedule. It drives through the gate between them on its own. Set up on a Tuesday evening.

I’ve taken some chances on products before but none have disappointed me quite as much. This robot lawn mower certainly isn’t wireless as it requires an antenna to either be mounted to your roof or in the middle of the yard WITH A WIRE! Sure the robot itself could drive around without a wire, but that’s assuming the antenna can ever get an adequate signal. If your yard is so small that this thing could actually work then why not just buy a cheap hand mower or pay someone minimally to cut it. Installation is complex and full of failures. Save your time and money. Absolutely the worst would give zero stars if possible.

We love our X3 (we call him Detective Munch) He works hard. The set-up was pretty easy though the driving/mapping took a minute to get right. Also the cutting level dial was not described in the set-up documentation so i had to look that up. Also, being in florida, the rain sensor picks up the morning dew so the robot doesnt go out on schedule sometimes unless i dry it off or override the rain sensor. I would recommend the garage but not sure if the one on Sunseeker is worth the price as it expensive.

Multi-zone in the app is fantastic — each area on its own schedule with no-go zones around the garden. AONavi keeps it precise everywhere on our 0.3 acre.

Handles our medium yard and the obstacle avoidance is quick. The multi-zone tools work well but aren't the most intuitive at first. Worth it once you learn them.

Bought it specifically for the Ride-on-Edge and it delivered. Hardscape edges are crisp, beds are avoided, and I do nothing. Excellent.

Every other model leaves a strip along walls and fences. The X3 Plus's offset blade gets right up to them. That's the differentiator that sold me.

The offset blade reaches the borders other robots leave shaggy. Our fence line and driveway edge look professionally done. That feature alone is worth it.

The Ride-on-Edge blade cuts right to the fence and paver edges. I used to spend 20 minutes edging every week — the X3 Plus made that chore disappear.

The Ride-on-Edge cutting is the star. Getting the no-go areas mapped just right took me a few passes, but once dialed in it's flawless.

Vision AI spots the soccer ball and the dog's chew toy and steers around them in real time. No more picking up the yard before every mow.

We're near a busy path and theft worried me. The GPS lock and geofence give me peace of mind. And honestly the edge cutting is the best part of owning it.

Between edge cutting and multi-zone scheduling, the X3 Plus killed my mowing AND my edging on our 0.3 acre. Saturday mornings are mine again.

Between the edge cutting, multi-zone maps, and dynamic obstacle avoidance, this thing basically retired my trimmer and my Saturday mornings.

We back onto a walking path so theft worried me. The GPS lock and geofence alerts made me comfortable. And the edge cutting is honestly the best part.